[vc_row][vc_column][vc_column_text]MATERIAL IDENTIFICATION
Technical Name Poly Alluminium Chloride
Synonyms : PAC, Poly aluminum hydrochloride
Chemical Formula : (Aln (OH)m Cl 3n-m)
Chemical Classification : Acid
Hazard Class 8- Corrosive[/vc_column_text][vc_column_text]CAS Regi stry No : 1327-41-9 Haz Chern Code Hazardous Waste ID
UN No : 1760
Product Use : Used as a Coagulant for the treatment of drinking water. Used as a sizing agent in Paper Industry
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_column_text]HAZARDOUS INGREDIENTS
Hazardous Ingredient : LD50
Poly aluminium chloride[/vc_column_text][vc_column_text]PHYSICAL AND CHEMICAL PROPERTIES
State
Clear Liquid
Molecular weight
Formula : (Aln (OH)m Cl 3n-m)
Containing 9.5 w/w/ Al2 o3 min 2.3
Vapour pressure : 30 mm Hg at 0°C
Melting Point : —[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_column_text]Concentration : 10 %[/vc_column_text][vc_column_text]Colour
Amber-light yellow
Specific gravity : 1.2g/Cm3 at 20°C
Vapour density : —
Boiling Point : —[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_column_text]CAS/UN NO :1327-41-9[/vc_column_text][vc_column_text]Odour
Odourless
Water solubility : Highly soluble miscible pH in all proportions.
Freezing Point : 10oC
Others : —[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_column_text]LC 50[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_column_text]FIRE / EXPLOSION HAZARD DATA
Flammability
Non Flammable
Auto ignition temperature products
Sensitivity to chemical impact discharge[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_empty_space][vc_column_text]TOG Flammability
Explosive range[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_empty_space][vc_column_text]Flash Point
Hazardous combustion
Sensitivity to static[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]REACTIVITY DATA
Chemical Stability
Stable at normal temperature and pressure Reactivity
products
Reacts aggressively with some metal surfaces (e.g.galvanised metal, aluminium copper, zinc and alloys of these metals)
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]Dangerous reaction
react with meal to liberate flammable hydrogen gas.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_column_text]HEALTH HAZARD DATA
Route of entry
Skin Contact. Ingestion, inhalation.
Effects on acute exposure
Skin Contact:- May cause burns- mild burns with 10%
Eye Contact :- May cause corneal damage
Ingestion :- May cause damage to mucous, membranes,nausea. vomiting
Sensitization to Material : —
PREVENTIVE MEASURES
Storage requirement : Rubber lined tanks, plastic tanks glass reinforced plastic tanks.
Engineering Controls :Non Combustable & Corrosion resistant floor, dike wall.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]Permissible limits
TLV(c).2Mg/M3[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]Lethal dose
Effects on Chronic exposure
Synergistic materials : —
Handling Methods: Pumping
Personal protective equipment
Protective clothing, rubber gloves Eye goggles / face shield, Gum boot.[/vc_column_text][/vc_column][vc_column][vc_column_text]Leak, spill handling:
Do not allow run off to enter sewers or water ways small spills of liquid, absorb with sand large spills of liquid, contain then neutralise with caustic soda solution and dispose.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]Waste disposal
Disposal of PAC using a licensed waste disposal contractor
EMERGENCY / FIRST- AID MEASURES
Fire extinguishment
Not flammable
Eyes &Skin : Ingestion[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]Special shipping information
Special procedure
Wash with running water atleast for 15 minutes , Do not induce vomiting, give small quantity of water to dilute the substance seek medical attention.[/vc_column_text][/vc_column][vc_column][vc_column_text]ADDITIONAL INFORMATION
Poly aluminium chloride becomes unstable when stored or transported at temperature higher than 40oC[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]MANUFACTURER / SUPPLIER / CONSUMER DATA
THE ANDHRA SUGARS LIMITED
Chemicals & Fertilisers
Division. KOVVUR- 534 350, A.P.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]Phones : 231597,231598,231599
Telex :0474-242
Grams : CHEMICALS
Fax :08813-231218[/vc_column_text][/vc_column][vc_column][vc_column_text]DISCLAIMER :
The information contained in this Material Safety data sheet is believed to be reliable but no representation, guarantee or warranties of any kind are made as it’s accuracy, suitability for a particular application or results to be obtained from them. It is however, ensured that the information contained in the material safety data sheet is relevant to the product manufactured I handled or sold as the case may be by us.[/vc_column_text][/vc_column][/vc_row]
